Some search engines listing incorrect address and stating Wilkie is closed
Some search engines are listing a incorrect physical address for Wilkie Mfg. LLC. as well as stating we are closed. This is not true as we are open for business Monday to Friday from 7:30 to 4:30 CST and we have not closed. We have been operating at 2640 NW 2nd street Oklahoma City, OK since 1976 and have not moved.
We have attempted several different ways to get Bing and a couple of other search engines to correct this but have not been successful as of yet in getting errors on their end corrected. So if you have seen this please report it to them as incorrect.
Preparing Equipment Before A Storm.
Hurricane, blizzard, monsoon rains, etc., they all have large amounts of moisture involved, and before they hit you can take precautions to help your equipment weather the storm.
Grease: Every grease fitting (zert) and open face gear needs greased. The grease will form a barrier to moisture trying to penetrate, as well as being a barrier against rust. Wilkie recommends a multi-purpose type grease.
Main hinge/pivot pin, top and bottom elevation cylinder pins, base rotation bearing, all cable sheaves (pulleys), rotation gears, winches, etc.
Weather seals for controls and switches: All seals on controls and switches should be pliable, set firmly and without cracks, tears, or any distortion. If you have a damaged weather seal and have time, it’s best to change them with a new seal. If you do not have time, then apply a thin coat of silicone sealant to the damaged area to form a weather resistant seal.
Lamp and toolboxes: Make sure the drain holes are free from obstructions and clear. Bins with twist type latches can have the internal latch mechanism adjusted to tighten the door against the weather seal. Paddle type latches can have the latch striker plate manually adjusted to increase tension between the door and seal.
Gas powered welders: Top off the fuel tank, check engine oil, and make sure the air filter is installed properly.
Truck: Top off the fuel tank and add a moisture dispersant to the fuel as preventative. Check all fluid levels and fill accordingly. Check air pressure in tires, lights (headlights, park lights, stop & turn lights. Before the storm if you have time, you might consider supplies for crews, such as water, rain coats, gloves, first aid supplies, cell phone charger, etc. In warm environments consider mosquito repellant, snacks, flashlights, etc. If you have time, if truck has battery powered tools, have all the batteries fully charged, and extra supplies like saw blades, drill bits, etc. on hand.
Fuel containers. If the truck carries fuel containers for welders, generators, etc., fill containers, and add moisture dispersant as a preventative. Store container in a secure area (tool box) make sure it is vented. If left on truck bed, make sure it is secured from wind and possible theft.
Changing the cables on a Wilkie model 60 ladder
Information on battery powered WIlkie units
Repacking the down leg on the hydraulic outrigger.
Ford motor company frame recall 11-18-2021 video